Click image to view full size image
● Technical Information:
MPO/MTP® Cassette are pre-terminated, pre-tested, and come with 12- or 24-fiber MPO/MTP connectors on the back that break out to single or array connectors on the front. Cassettes are custom-built to your configuration needs and modules are custom-built to to meet your specific application needs. Select from a variety of connectors including LC, SC, and MU for OM1, OM2, OM3, OM4, and OS2 deployment.
● Features:
► Factory terminated & tested with guaranteed quality;
► High density to dramatically save space;
► Optimize network performance;
► The best solution covers all fiber optic cabling needs
in all areas of Data Center.
● Specification:
MPO/MTP® Cassettes with LC or SC connectors have optimized optical performances: a maximum Insertion Loss of 1.3dB per cassette and a minimum Return Loss of 20dB (Multimode), 55dB (Single mode) per cassette. Each cassette is small in size. On the back side of the cassette are one or two 12-fiber MPO adapters. On the front side of the cassette may be 12 SC simplex ports or 6, 12 LC Duplex ports.
● Mechanical Technical:
● General Connector Specification:
Parameter |
Single-mode |
Multi-mode |
|||
|
Basic |
Fiber connector |
FC, SC, LC, ST, MU, MTRJ, MPO |
|||
Ferrule End-face |
PC |
UPC |
APC |
UPC |
|
Insertion Loss |
≤0.2dB |
≤0.2dB |
≤0.3dB |
≤0.3bB |
|
Return Loss |
≥50dB |
≥55dB |
≥60dB |
≥35dB |
|
Ceramic Ferrule Specification |
125.5um concentricity deviations: |
127um concentricity deviations:<=3um |
|||
Suitable Fiber |
9/125um |
50/125um,62.5/125um |
|||
|
End-face Geometry |
Radius of Curvature |
7~25mm |
5~12mm |
N/A |
|
Fiber Protrusion |
≤50nm |
≤100nm |
N/A |
||
Fiber Under Cut |
≤100nm |
≤100nm |
N/A |
||
Apex offset |
≤50um |
||||
Mechanical |
Exchangeability |
≤0.2dB |
|||
Salt Spray |
≤0.1dB |
||||
Drop |
≤0.2dB(1.5M, 5 drops) |
||||
Vibration |
IL ≤0.2dB(550Hz, 1.5mm) |
||||
Repeatability |
≤ 0.1dB(1000 times) |
||||
Durability |
> 1000 times |
||||
Operating Temperature |
-40℃ ~ +85℃ |
||||
● The basic division of MTP® connectors:
Type and Color |
Insertion |
Optical |
Operating |
Single-mode MTP® Elite® Connector |
0.10 dB Typical (All Fibers) 0.35 dB Maximum (Single Fiber)1 |
> 60 dB (8°Angle Polished)2 |
-40℃ to 75℃ |
Single-mode MTP® Standard Connector |
0.25 dB Typical (All Fibers) 0.75 dB Maximum (Single Fiber)1 |
> 60 dB (8°Angle Polished)2 |
-40℃ to 75℃ |
Multimode MTP® Standard Connector |
0.25 dB Typical (All Fibers) 0.75 dB Maximum (Single Fiber)1,3 |
> 20 dB (0°Flat Polished)2,3 |
-40℃ to 75℃ |
1 IL test according to IEC 61300-3-4; | |||
● Products Overview:
● Packing Information:
● High Density MTP®/MPO Cabling System In Dada Center:
● Ordering Guide:
► 1 ea for individual static-free bag with test report;
► Connector Customized Inquired;
► Fanout / breakout Cable Customized Length;
| Product Description |
MTP/F/PC - LC/UPC/DX - OM3 - 12B - B2.0 - 1.5M/0.6M - LSZH - Aqua - A 1 2 3 4 5 6 7 8 9 |
1 - Connector A |
MTP/F/PC: MTP Female,PC polish; MTP/F/APC: MTP Female,APC polish; |
2 - Connector B |
LC/UPC/DX;LC/APC/DX;LC/UPC/SX;LC/APC/SX;LCP/UPC;LCP/APC; |
3 - Fiber Mode |
OM1, OM2, OM3, OM4, OS2, G657A1 |
4 - Fiber Count&Type |
12R: 12F Ribbon; 12BR: 12F Bare Ribbon; 12B: 12F Mini Round Cable |
5 - Breakout Type |
B2.0: 2.0 fan-out with splitter kit. |
6 - Length |
1.5M/0.6M: Cable total length1.5M, fan-out length 0.6M, etc. |
7 - Cable Jacket Materials |
LSZH,OFNP,OFNR,PVC |
8 - Cable Jacket Color |
Aqua (OM3,OM4) Orange (OM1,OM2), Yellow (SM). |
9 - Polarity |
A: Type A; B: Type B; C: Type C. |
E-mail: 